In certain parts of the world, wildfires are becoming a worsening problem, and the likelihood of being impacted by smoke on our camp, hike, or climb is increasing. Smoke damage to our lungs can be a serious health issue, so we've taken steps to help mitigate that by leveraging a tool that we never used to have a few years ago but which is nearly ubiquitous now.

Over the years, and even decades, of my climbing career, I’ve noticed an increase in the frequency of smoke from wildfires impacting my - and my family’s - outdoor activities. We now factor in smoke and wildfires into our climbing, hiking, and climbing planning process just like we would with weather. The full video goes deeper into some resources we use for that planning.

The Sterling HallowBlock2 is a sewn prusik loop for climbing that does some specific things very well but is limited in a few use cases. Here are some strengths and limitations of this piece of climbing kit.

If we feel the need to get down from a climb quickly, we may be tempted to employ a counterbalance rappel. That rappel technique does allow two rappels, simultaneously, so it is faster, but it adds risks that we need to mitigate. The full video offers six tips that will mitigate those risks.

If we are ascending the rope with old-school techniques, using just prusik cords, we need to remember that modern tools demand we set up the ascension system differently than old tools. So, the mnemonic “waist away,” can help us remember in what order to set up our prusiks on the rope.

While on rappel (or abseil), for several reasons we could end up with a rope that is too short to make it to our next safe rappel anchor using a standard two-strand rappel on a doubled-over rope. If we end up in that situation, we need a procedure to deal with things in a safe way. The full video offers such a procedure.

Minimalism can mean added safety through simplicity. But when does minimalism go too far? Here we use an example of a foot lock and a single prusik for rope ascension. All you need for this setup is a single sling (or a sling and a carabiner). But it leaves us exposed to lack of redundancy on a friction hitch that can (and has) failed. If we were to choose something so minimal, what might we do to add safety margin to the setup? At what point does having more gear just make sense?

In some circumstances, attaching two ropes together and lowering a first climber down on a single strand may be the safest way to descend a climbing route. If we do so, we need to be able to pass the rope-joining knot through the lowering system safely and efficiently. The full video provides two methods for doing so.

We can take the foundation of a basic Mountaineer’s Coil and turn it into an emergency rescue seat by making just a few modifications, and all of it takes no more than the climbing rope we already have with us.

There are many ways to coil our climbing ropes. Just like climbing knots, though, each coil method has its own benefits and drawbacks. The full video shares four different ways to coil a climbing rope along with a description of some circumstances when one coil method might prove a better option.

The Valdotain Tresse, or VT Hitch, is a friction hitch made using an eye-to-eye cord. It has some advantages over other friction hitches, but also some disadvantages. Here is a discussion of those pros and cons as well as a quick tutorial on tying the hitch.

If we are belaying a climber from the top on a multipitch climb, and if that second climber is unable to make a hard move, we can help them past the point where they are stuck by using a haul assist. The full video demonstrates four haul assists, from least complex (with limited assistance gained) to more complex and robust.

When we tie our expensive gear down to a vehicle or a sled, we want to make sure that it is both secure and easy to get untied. Making a variation on the Trucker’s Hitch by using some climbing knots that are explicitly used to secure loads while being comparatively releasable can ensure that we accomplish both goals.

If we have a climbing rope loaded below us (maybe a climber is unconscious and weighting the rope), we may not be able to attach our rappel device, or even if our device was attached before the rope got loaded, being on a "fireman's belay" might keep us from moving down. The full video shares how we can descend a rope when it is pulled tight below us.

When we get into winding trad and alpine climbs, carrying a few alpine draws can add flexibility to our climbing rack. But there are also downsides to this tool of which we should be aware.

We introduced our kids to "projecting" a climbing route when they first started confronting routes they had considerable difficulty with. While there are many tactics that can help, the full video gets into how we began their education by focusing on the climb at three levels of progressive detail and then setting a mindset that helped redefine success criteria based on which level of detail we were focused on for a particular attempt.

When conditions get so bad that simply building and taking down an anchor can be a challenge, using a setup that only uses easy-to-undo hitches, rather than full knots, may make a lot of sense. Here are two variations of one such anchor set up.

There is a lot of time and attention spent on climbing well and the climbing mindset, but what about the belayer? Particularly when on lead, belaying a climber can also be stressful, especially for those just starting out. How do we create a safe place to learn in a situation where mistakes aren’t normally acceptable? Here’s how we approached getting our new climbers (our kids) to lead belay.

For May’s Mental Health Awareness Month we get into some of the mental aspects of climbing and adventure. I certainly have my preferred gear and techniques, but I find it is important to check my own biases and complacency by remembering that there are no pieces of gear or system techniques that remove all risks.

Every May, we make videos on the mental side of climbing and adventure in recognition of National Mental Health Awareness Month. The full video is about how the unknowns increase in complex environments thus increasing our risk. Reducing complexity, not of systems but of the number of times we go into truly highly complex environments, may be one way to reduce our overall risk across a lifetime of climbing.